EVO Lite Series Remote Controller Overview
EVO Lite series adopts the new generation of Autel Skylink image transmission technology of Autel Robotics, has strong anti-interference capability and supports the double-emission and double-receiving of 2.4GHz, 5.8GHz and 5.2GHz.
It can complete the control and setting of drone and camera within at most 10km communication distance (FCC, no interference, no blocking) and can display a high-definition picture in mobile device in a real-time manner by Autel Sky App. The telescopic mobile device support can stably support the mobile device, and the built-in battery of remote controller is 3930mAh that can work for about 3.5h.
Components description
|
① Power button |
Long press the button for 2s to turn on/off the remote controller |
|
② Pause button |
Indicate the suspension of the autonomous flight of aircraft and hovering on the spot or the recovery of the autonomous flight. |
|
③ Power indicator |
Indicate the current battery level of remote controller |
|
④ Charging interface |
It is used for charging the remote controller and adjusting parameters. |
|
⑤ Return button |
Command the aircraft to return waypoint |
|
⑥ Command stick |
Control the direction and motion of aircraft. |
|
⑦ Mobile device support |
It is used to fix the mobile device with the adjustable viewing angle. |
|
⑧ Antenna |
The frequency for communication with aircraft is 2.4GHz /5.8GHz / 5.2GHz. |
|
⑨ Mobile device interface |
It is used to connect the mobile device. |
|
⑩ Photo/video button |
Start or stop taking photo/recording video. |
|
⑪ User-defined button |
Use Autel Sky to set functions. |
|
⑫ Gimbal pitching dial |
Control the pitch angle of camera gimbal. |
|
⑬ Air inlet |
It is used for remote controller cooling. |
|
⑭ Air outlet |
It is used for remote controller cooling |
Remotely control aircraft
The remote controller includes Mode 1, Mode 2 and Mode 3 based on operation habit and can also be self-defined in Autel Sky App. The beginner is recommended to use the Mode 2 as control mode.
Remote controller calibration
If the command stick is abnormal (the remote controller falls on the ground or the flight direction of the evo lite series drone is not consistent with its operation direction), the remote controller is recommended to be calibration. You can calibrate the remote controller by using Autel Sky App.
Remote controller pairing
The remote controller and the aircraft have been paired in the factory. If the remote controller needs to be paired again after replacement, please follow these steps:
Method 1
- Turn on the aircraft and the remote controller, double-click the aircraft battery button. The
- LED on the rear of the aircraft will flash quickly to show it is ready to pair.
- Connect your remote controller and mobile phone, operate Autel Sky App, click “Connect
- New Aircraft” in “Personal Center,” and follow the pairing instruction.
- After successful pairing, the LED at the tail of aircraft will be on for 5 seconds and thenflash slowly. The App will switch to the image transmission interface.
Method 2
- Turn on the aircraft, double-click the aircraft battery button. The LED on the rear of the aircraft will flash quickly to show it is ready to pair.
- Press and hold the power button and the home button on the remote
controller at the same time for 3 seconds to turn on the remote controller. The remote controller indicator will flash quickly to show it is ready to pair.
- After successful pairing, the LED at the tail of aircraft will be on for 5 seconds and then flash slowly.
With whole new remote controller, you are able to control your autel evo lite drone or evo lite+ even when it's 10km far from you. The remote control with Autel Skylink and the EVO Lite camera drone makes a perfect combination！
You Might Also Like:
Autel Robotics Introduces Training Programs for Dragonfish Series
How To Make Profit With A Drone?
How To Use Autel Sky App Dynamic Track?
Portrait Mode and more with Autel SKY APP new firmware update
