1. Make sure the aircraft is turned off.

2. Pair the propeller with the dot mark with the arm with the dot, and the propeller without the dot mark is paired with to the arm without the dot.

3. Align the propeller round holes with the motor screw holes and lock the screws tightly.

Yes, when using one key to return, please set the return altitude and always observe the surrounding environment to avoid collision during the return.

Support for automatic follow-up of selected targets is available through the Autel Sky app.

No.

You need to connect your mobile phone to the remote controller, then pair with the aircraft through the Autel Sky app, and follow the instructions of the Autel Sky app to complete the activation.

1. Turn on the aircraft power supply and place the aircraft on the ground.

2. Connect mobile phone to the remote controller, operate Autel Sky App, and pair aircraft and the remote controller.

3. After pairing, open the album, select the required materials and then click the download icon to realize high-speed download.

Notes:

- Please use the fast transfer function in an interference-free and unobstructed environment, away from routers, Bluetooth headphones and other sources of interference.

- In countries and regions where 5.8GHz band is allowed by law, the maximum download rate can be achieved in an interference-free and unobstructed environment. If the local 5.8GHz band is not allowed, the download rate will be limited when using 2.4GHz band for transmission.

A customizable function button is set in the upper left corner of the remote controllor, which can be customized by Autel Sky app to set the following functions.

When you click/double click the custom button: obstacle avoidance on/off; AE lock/unlock; gimbal back to center/down; map/FPV switch.

Yes.

Single shot, continuous shot, AEB, timer, HDR.

The capacity of the battery is 17.32Wh and can be carried on board airplanes according to airline regulations.

When the battery is used in a low-temperature environment, note that the battery life will be reduced. To optimize performance in the cold, it is recommended to warm the battery up to 15 °C before use.

Each battery takes approximately 90 minutes to fully charge.

You can use the Type-C charging cable to charge directly to the aircraft charging port and adapter, or you can use Multi-charger to charge the battery.

Yes.

a.If you turn off the device during the upgrade process, it will cause the upgrade to fail.

b.If you disconnect during the firmware package download process, the upgrade will fail.

c.Make sure the remaining power of the battery and remote control is ≥ 30% before upgrading.

Method 1: Download the firmware upgrade package from Autel Sky app

1. Open the remote controllor and the aircraft, connect your phone to the remote controllor and run the Autel Sky app.

2. When the system detects a new firmware version, Autel Sky app will automatically pop up a prompt box after connecting to the aircraft to remind you to download and install.

3. Please follow the instructions on the Autel Sky app to update the firmware, users can check the upgrade process through the app interface.

4. Please restart the flight device and remote control after the upgrade is completed.

Method 2: Download the firmware upgrade package from the official website of Autel Robotics

1. Visit the official website of Autel Robotics to download the firmware upgrade package: www.autelrobotics.com. 

2.Insert the SD card into your computer and save the downloaded firmware package to the root directory of the SD card.

3.Turn on the remote controllor and the aircraft, connect your phone to the remote controllor and run the Autel Sky app.

4. Insert the SD card into the aircraft, the upgrade process will start automatically, users can check the upgrade process through the app interface.

5. Please restart the aircraft and remote controllor after the upgrade is completed.